Wireless network 1151 On the camera, rotate the mode dial to .2 On the camera, select .• If the pop-up message that prompts you to download the applicationappears, select Next.3 On the smart phone, turn on the Samsung SMART CAMERA App.• For iOS devices, turn on the Wi-Fi feature before turning on the application.• To start the application automatically on an NFC-enabled smart phone, turnon the function and place the smart phone near the NFC tag (p. 16) on thecamera.4 Select the camera from the list and connect the smart phone to thecamera.• The smart phone can connect to only one camera at a time.5 On the camera, allow the smart phone to connect to your camera.• If the smart phone has been connected to your camera before, it is connectedautomatically.6 On the smart phone, set the following shooting options.• While using this feature, some buttons are not available on your camera.• With the smart phone, you can operate the camera only by touching thescreen.• Remote Viewfinder mode supports the 10M and 3M photo sizes only.7 On the smart phone, touch and hold to focus.• The focus is automatically set to Multi AF.8 Release to capture the photo.Using a smart phone as a remote shutter releaseThe camera connects to a smart phone via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature. The captured photo will display on thesmart phone.• The Remote Viewfinder feature is supported by smart phones or tablets running Android OS or iOS. Some features may not be supported by some models. Before using this feature,update the device’s firmware to the latest version. If the firmware version is not the most recent, this function may not perform properly.• You should install the Samsung SMART CAMERA App on your phone or device before using this feature. You can download the application from Samsung Apps, the Google Play Store,or the Apple App Store. The Samsung SMART CAMERA App is compatible with Samsung camera models manufactured in 2013 or later.