Basic functions 26Performing the initial setupWhen you turn on your camera for the first time, the initial setup screen appears. Follow the steps below to configure the camera’s basic settings. The language is preset for thecountry or region where the camera is sold. You can change the language as desired. You can also select an item by touching it on the screen.5 Press [c] to select Date/Time Set, and then press [t] or [o].Cancel SetDate/Time SetYearMonth Day Hour Min DST• The screen may differ depending on the language you selected.6 Press [F/t] to select an item.7 Press [D/c] to set the date, time, and daylight-saving time, andthen press [o].1 Press [c] to select Time Zone, and then press [t] or [o].2 Press [D/c] to select Home, and then press [o].• When you travel to another country, select Visit, and then select a new timezone.3 Press [D/c] to select a time zone, and then press [o].Time ZoneBack Set[GMT +00:00] London[GMT +01:00] Berlin, Paris, Rome[GMT +02:00] Athens, Helsinki[GMT +03:00] Moscow4 Press [b].