MEETING iNSTALLATiON REQUIREMENTSElectrical supply• 120 Volt 60 Hz 15 AMP fuse or circuit breakerIndividual branch circuit serving only your Washer is recommended.Your Washer is equipped with a power cord._ Never use an extension cord.CAUTIONGroundingELECTRICAL GROUNDING IS REQUIRED FOR THIS APPLIANCE.This appliance must be grounded. In the event of malfunction or breakdown, grounding willreduce the risk of electric shock by providing a path of least resistance for electric current.This appliance is equipped with a power cord having a three-prong grounding plug for use in aproperly installed and grounded outlet.Z_ Improper connection of the equipment-grounding conductor can result in a risk of electrical....... shock. Check with a qualified electrician or serviceman if you are in doubt as to whetherthe appliance is properly grounded. Do not modify the plug provided with the appliance. If itdoes not fit the outlet, have a proper outlet installed by a qualified electrician.IMPORTANT SAFETY PRECAUTIONSTo prevent unnecessary risk of fire, electrical shock or personal injury, all wiring andgrounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.70 Latest Revision and local codes and ordinances. It is the personal responsibility of theappliance owner to provide adequate electrical service for this appliance.Z_ Never connect ground wire to plastic plumbing lines, gas lines, or hot water pipes.CAUTIONsettng up your washer 13WF210AN-02832A EN.indd 13 2010-02-09 o_,,,f1:14:57