Samsung WF338 series User Manual

Contents

Troubleshooting _21troubleshootingCHECK THESE POINTS IF YOUR WASHER…PROBLEM SOLUTIONwill not start.. • Make sure the door is firmly closed.• Make sure your Washer is plugged in.• Make sure the water source faucets are turned on.• Make sure to press the Start/Pause Button to start your Washer.• Make sure the Child Lock is not activated; see page C4.• Before your Washer starts to fill, it will make a series of clicking noisesto check the door lock and do a quick drain.• Check the fuse or reset the circuit breakerhas no water or not enoughwater..• Turn both faucets on fully.• Make sure the door is tightly closed.• Straighten the water inlet hoses.• Disconnect hoses and clean screens. Hose filter screens may beclogged.• Open and close the door, then press the Start/Pause Button.has detergent remains inthe automatic dispenserafter the wash cycle iscomplete.• Make sure your Washer is running with sufficient water pressure.(1kgf/cm2 or higher)• Make sure the Detergent Selector dial is in the upper position whenusing granular detergent.vibrates or is too noisy. • Make sure your Washer is set on a level surface. If the surface is notlevel, adjust your Washer feet to level the appliance.• Make sure that the shipping bolts are removed.• Make sure your Washer is not touching any other object.• Make sure the laundry load is balanced.stops • Plug the power cord into a live electrical outlet.• Check the fuse or reset the circuit breaker.• Close the door and press the Start/Pause Button to start yourWasher.For your safety, your Washer will not tumble or spin unless the door isclosed.• Before your Washer starts to fill, it will make a series of clicking noisesto check the door lock and do a quick drain.• There may be a pause or soak period in the cycle. Wait briefly and itmay start.• Check the screens on the inlet hoses at the faucets for obstructions.Clean the screens periodically.05 TroubleshootingWF338AA-02562A-01_EN.indd 21 2008-03-10 ¿ÀÈÄ 3:35:50