Samsung WF361BVBEWR/A1 User Manual

Also see for WF361 Series: User manual User manual User manual User manual Technical information

Contents

16_ setting up your washerINSTALLING YOUR WASHERBefore STEP 5 is complete, do not plug the power cord into a wall socket.Packaging materials can be dangerous to children; keep all packaging material (plastic bags,polystyrene, etc.) well out of the reach of children.Installation flow chartSelecting alocationFinish theinstallationRemoving the shippingbolts (*Drum only)Connecting the waterand the drainAdjusting thelevelling feetPowering your washingmachine[Running a test cycle]Run a test cycle (Rinse+Spin) withsmall amount of laundary(about 4~5 Towels)YesPleasecheck againbeforesteps.NoDoesyour washerhave excess vibrationor noise?STEP 1Selecting a locationBefore you install the washer, make sure the location:• Has a hard, level surface without carpeting or flooring that may obstruct ventilation.• Has no dust, oil, detergent etc.• Is away from direct sunlight.• Has adequate ventilation.• Will not have temperatures at or below 32 ˚F or 0 ˚C.• Is away from heat sources such as oil or gas.• Has enough space so that the washer doesn’t stand on its power cord.STEP 2Removing the Shipping BoltsBefore using your washer, you must remove all shippingbolts from the back of the unit.1. Loosen all the bolts with the supplied wrench.2. Slide the bolt and spacer up and remove the bolt withthe spacer through the hole in the rear wall of yourwasher. Repeat for each bolt.3. Fill the holes with the supplied plastic covers.4. Keep the shipping bolts and spacers for future use.setting up your washerWARNINGCAUTIONWF361_363_365-02832J-03_EN_20120829.indd Sec5:16WF361_363_365-02832J-03_EN_20120829.indd Sec5:16 2012-08-31 12:38:172012-08-31 12:38:17