Samsung WF419AAW User Manual

16_ Washing a load of laundryChild lockA function that prevents children from playing with your washer.Once the Child Lock function is activated, the control panel cannot be activated, preventingchildren from playing with the washer.ACTIVATING/DEACTIVATINGIf you want to activate/deactivate the Child Lock function, press the Spin and Soil Level buttonsat the same time for 3 seconds.How It works:1. “Child Lock” can be activated and deactivated while your washer is running.2. Once you activate “Child Lock”, all controls (except for the Power button) will be lockeduntil you deactivate “Child Lock”.3. The Child Lock button will be lit while it is in effect.When buttons, other than the Power button, do not respond, please check if the “ChildLock” function is on.Garment+You can add or take out laundry items even after the wash has started, as long as the “(Garment+)” light is on. Pushing the Start/Pause button unlocks the door, unless the water istoo hot or if there is too much water in your washer. If you are able to unlock the door and wishto continue the wash cycle, close the door and press the Start/Pause button.My cycleAllows you to activate your custom wash (temperature, spin, soil level, etc.) with one–buttonconvenience.By pushing the My Cycle button, you activate the settings used during the My Cycle mode.The “My Cycle” light will indicate activation.You can select all options as follows in the “My Cycle” mode.1. Select cycle using the Cycle Selector dial.2. After cycle selection, set each option.See page 28 for available option settings with each cycle.3. Then, you can start “My Cycle” by pushing the Start/Pause button in “My Cycle” mode.The cycle and options you select will be displayed the next time you choose “My Cycle”.You can change the “My Cycle” settings by repeating the same process above.The last used setting will be displayed the next time you choose “My Cycle”.washing a load of laundryBEST-WF419AAW-02657A_EN.indd 16 2009-02-18 ¿ÀÈÄ 3:26:47