Washing a load of laundry _3102 WASHING A LOAD OF LAUNDRYSpin SpeedTap this option to change the currently selected spin speed setting. The available spin speedsettings are No spin, Low, Medium, High, and Extra High. However, depending on the selectedcycle, some of them are unavailable and are shown as disabled.Soil levelTap this option to change the currently selected soil level setting. The available soil level settingsare Extra Light, Light, Normal, Heavy, and Extra Heavy. However, depending on the selectedcycle, some of them are unavailable and are shown as disabled. Use this option to remove stainsfrom your laundry effectively.ExtrasTap this option to add or remove the extra cycles to or from the selected cycle. The availableextra cycles are Prewash, Steam, Extra Rinse, and Extra Spin. However, depending on theselected cycle, some of them are unavailable and are shown as disabled. An extra cycle addedto the selected cycle is shown with a checked icon. For example, is displayed when thePrewash cycle is added. is displayed when it is removed. Tap each enabled extra cycle toadd it or remove it from a selected cycle.Available actionsYou can carry out additional actions and view and confi gure other settings using the controlsprovided in the Actions section of the Cycle Selection screen.There are six controls: Smart Control, Save as My Cycles, Delay Start, Child Lock, Light, andSettings.Smart ControlTap this control to turn the Smart Control function on or off. When this function is turned on, youcan control the washer using your mobile phone.When this function is turned off, the icon is . When it is turned on, the icon is .Turn this control on if you want to control your washer using your mobile phone.Any actions performed on your washer will turn off the Smart Control Function (tapping theLCD panel, pushing buttons, etc.).Save As My CyclesSave your favourite cycles including the temperature, spin speed, soil level and extra cycleoptions. You can save up to 3 My Cycles.For more information, refer to the “Using the My Cycle function” section on page 35.Delay StartTap this control to delay the start of the selected cycle by setting a specific start time. If thewasher recognizes that the Smart Grid is available, the options for turning variable energy use onor off are accessible. When Delay Start is turned on, the icon changes from to .For more information, refer to the “Using the Delay Start function” section on page 36.WF457ARG-03153A_EN.indd 31WF457ARG-03153A_EN.indd 31 2012-03-09 4:09:292012-03-09 4:09:29
