Samsung WF511ABR/XAA User Manual

Also see for WF511AB series: Service manual User manual Fast track troubleshooting

Contents

32_ maintaining your washermaintaining your washerPURE CYCLETMPure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine.1. Press the Power button.2. Press the Pure Cycle TM button.• Once the Pure Cycle button is pressed, the onlyfunction that can be set is Delay Start.3. Press the Start/Pause button.• If you press the Start/Pause button, Pure Cyclebegins.• Using Pure Cycle, you can clean the drum without using a cleansing agent.• Never use Pure Cycle when laundry is in the washing machine. This may cause damage tothe laundry or a problem with the washing machine.• If you want to use drum cleansing agent, use only 1/10 of the amount of the drumcleansing agent recommended by the cleansing agent manufacturer. (When using apowder-type cleansing agent , remove the liquid detergent compartment.)The Pure Cycle Auto Indicator Function• If the “Pure Cycle” button is lit after a wash, it indicates thattub (drum) cleaning is required. In this case, remove thelaundry from the washing machine, turn the power on, andclean the drum by running Pure Cycle.• If you do not run Pure Cycle, the “Pure Cycle” indicatorturns off. However, the “Pure Cycle” indicator will light againafter two washes. Not running Pure Cycle at this point willnot cause a problem with the washing machine.• Although the Pure Cycle Auto Indicator appears once amonth or so, the frequency may differ depending on thenumber of times the washing machine is used.CAUTIONWF511ABR-03010A-03_EN.indd Sec4:32WF511ABR-03010A-03_EN.indd Sec4:32 2012-05-04 7:21:072012-05-04 7:21:07