Samsung WF8624GF User Manual

Also see for WF8500BF: User manual User manual

34_ troubleshooting and information codes*/'03."5*0/$0%&4When your washing machine malfunctions, you may see an information code on the display. If thathappens, check this table and try the suggested solution before calling Customer Service.CODE SYMBOL SOLUTIONdE t Close the door.4E t Make sure the source water tap is turned on.t Check the water pressure.5E t Clean the debris filter.t Make sure the drainage hose is installed correctly.UEt The laundry load is unbalanced. Redistribute the load. If only one itemof clothing needs washing, such as a bathrobe or pair of Denim, thefinal spin result might be unsatisfactory and an “UE” error messagewill be shown in the display window.cE/3E t Call the after-sales service.For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your SamsungService Centre or local Samsung dealer.calibrating your washingmachine$"-*#3"5*0/.0%&Samsung washing machine detects the laundry weight automatically. For more accurate weight detection,please run Calibration Mode after the installation. Calibration mode is done by following the steps below.1. Remove laundry or any contents in the machine and turn off the machine.2. Press the Temp button and Delay End button simultaneously, and press the Power buttonin addition. Then the machine turns on.3. Press the Start button to activate “Calibration Mode”.4. The drum rotates clockwise and counterclockwise approximately for 3 minutes.5. When “Calibration Mode” is finished, “End(En)” appears on the display, and the machineautomatically turns off. The washing machine is now ready for use.troubleshooting andinformation codes