Samsung WS-32Z308T Owner's Instructions Manual

Also see for CW-29Z418P: Owner's instructions

English - 10Viewing an External Signal Source (depending on the model)Use the remote control to switch between viewing signal from connected equipment,such as VCR, DVD, Set-Top-boxes and the TV source (broadcast or cable).1 Press the MENU ( ) button to display the menu.2 Press the ENTER ( ) button to select Input.3 Press the ENTER ( ) button again.4 Press the ▲ or ▼ button to select the required signal source, then pressthe ENTER ( ) button.Available signal source: TV, Ext. 1, Ext. 2, AV/S-Video, Component,HDMI➢ ◆ When you connect equipment to the TV, you can choose between thefollowing sets of jacks: Ext. 1, Ext. 2, Component, or HDMI on the TV’srear panel, and AV/S-Video on the TV’s side panel.◆ You can also set these options simply by pressing the TV ( ) or SOURCE( ) button. If you change the external source while viewing, picturesmight take a short period of time to be switched.Editing Device Names (depending on the model)You can give a name to the external source.1 Press the MENU ( ) button to display the menu.2 Press the ENTER ( ) button to select Input.3 Press the ▲ or ▼ button to select Edit Name, then press the ENTER( ) button.4 Press the ▲ or ▼ button to select the external source to be edited, thenpress the ENTER ( ) button.5 Select the required device’s name by pressing the ▲ or ▼ button, thenpress the ENTER ( ) button.Available device names: VCR, DVD, Cable STB, HD STB, Sat. STB, AVReceiver, DVD Receiver, Game, Camcorder, DVD Combo, DHR (DVDHDD Recorder), or PC.6 Press the EXIT ( ) button to exit.Source ListTVExt.1 : ------Ext.2 : ------AV/S-Video : ------Component : ------HDMI : ------Move Enter ReturnT VInputSource List : TV Edit Name Move Enter ReturnT VInputSource List : TV Edit Name Move Enter ReturnT VEdit NameExt.1 : ------Ext.2 : ------AV : ------S-Video : ------Component : ------HDMI : ------Move Enter ReturnT V------VCRDVDCable STBHD STBSat. STBAV Receiver