992. Using a Network-Connected MachineInstalling driver over the network• Some features and optional goods may not be available depending onmodel or country (see "Features by model" on page 6).• The machine that does not support the network interface, it will not beable to use this feature (see "Rear view" on page 19).• You can install the printer driver and software when you insert thesoftware CD into your CD-ROM drive.For windows, select the printer driver and software in the SelectSoftware to Install window.5WindowsThe firewall software might be blocking network communication. Beforeconnecting the device to the network, disable the computer’s firewall.1 Make sure that the machine is connected to the network and poweredon. Also, your machine’s IP address should have been set (see "Setting IPaddress" on page 96).2 Insert the supplied software CD into your CD-ROM drive.If the installation window does not appear, click Start > All programs >Accessories > Run.X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.• For Windows 8,If the installation window does not appear, from Charms, selectSearch > Apps and search for Run. Type in X:\Setup.exe, replacing“X” with the letter that represents your CD-ROM drive and click OK.If “Tap to choose what happens with this disc.” pop-up windowappears, click the window and select Run Setup.exe.3 Review and accept the installation agreements in the installationwindow. Then, click Next.4 Select Network on the Printer Connection Type screen Then,click Next.5 Follow the instructions in the installation window.
