System setup1983. Useful Setting Menus9ReportSome menus may not appear in the display depending on options ormodels. If so, it is not applicable to your machine (see "Menu overview" onpage 29).To change the menu options:• Press (Menu) > System Setup > Report on the control panel.• Or press Setup > Machine Setup > Reports.SpeakerTurns on or off the sounds from the telephone linethrough the speaker, such as a dial tone or a fax tone.With this option set to Comm. which means the speakeris on until the remote machine answers.You can adjust the volume level using On HookDial. You can adjust the speaker volume onlywhen the telephone line is connected.a Press (fax) on the control panel.b Press On Hook Dial. A dial tone sounds fromthe speaker.c Press the arrows until you hear the volume youwant.d Press On Hook Dial to save the change andreturn to ready mode.Ringer Adjusts the ringer volume. For the ringer volume, you canselect off, low, middle, and high level.Item DescriptionItem DescriptionMenu Map Prints the menu map which shows the layout andcurrent settings of this machine.Configuration Prints a report on the machine's overallconfiguration.Supplies Info. Prints supplies’ information page.Address Book Prints all of the email addresses currently storedin the machine’s memory.Demo Page Prints the demo page to check whether yourmachine is printing properly or not.
