Samsung YEPP YP-T5V User Manual

Also see for YP-T5 yepp': User manual Quick guide Manual Quick guide User manual

MP3 Encoding29 EnglishRecording Voice281 Press the REC button to start voice recoding.If the REC button is pressed again, the recording stops and a voice fileis created.2NNNN oooo tttt eeee Recording is performed in order (V001, V002, etc.)and files are saved in the WAV format after recording. If the Memory is full, the Voice Recording is stopped automatically. Voice Recording does not work in FM Mode or when the Line In cable is connected.To Record Voice 1 Connect the Audio Output port on the external audio source(or the Line Out port) to the ENC port on the device with the Line cable.2 Press the REC button to start MP3 encoding. If the button is pressed, encoding is paused and if the button is pressed again,the encoding resumes.3 If the REC button is pressed during encoding, the encoding stops and anencoding file is created. Encoding is performed in order (L001, L002, etc.)and files are saved in the MP3 format after encoding.NNNN oooo tttt eeee Bit Rates can be set within the range of 32Kbps~128Kbps. Volume can be adjusted from level 0 to 10 while monitoring the Encoding.NNNN oooo tttt iiii cccc eeee Do not disconnect the Line cable during Encoding. If the battery is not charged enough, encoding will not be done. Adjust the volume of the external audio source to a suitable level and encode it.If the volume level is extremely high, the sound quality may not be good.