67ENG66Power Off Settings1 In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,and then press the SEL button.2 Use the SCROLL UP/SCROLL DOWN buttons to select Auto Power off.3 Press the SEL button until the desired power-off time appears.● Select the desired power-off time, and then press the MENU button to go to the main menu.OFF ➔ 30sec ➔ 1min ➔ 5min ➔ 10min ➔ 15min.Fader Effect1 In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select Settings,and then press the SEL button.2 Use the SCROLL UP/SCROLL DOWN buttons to select Fader Effect, and thenpress the SEL button.3 Use the SCROLL UP/SCROLL DOWN buttons to select Fade Type, Curve Type,and Duration Time, and then briefly press the SEL button.● Complete the desired setting, and then press the MENU button to go to the main menu.● Fade Type : Each time the SELECT button is pressed, the selection changes as follows :- Fade Off: Music is played back at the volume level you set.- Fade In: Volume gradually increases only when playback starts.- Fade Out: Volume gradually decreases at the end only.- Fade In/Out: Volume gradually increases when playback starts and graduallydecreases at the end.● Curve Type : Each time the SELECT button is pressed, the selection changes as follows :- Linear: The speed at which the volume of music increases or decreases is fixed.- Slow: The speed at which the volume of music increases or decreases is slow.- Fast: The speed at which the volume of music increases or decreases is fast.● Duration Time : Each time the SELECT button is pressed, the selection changes as follows :3 ➔ 5 ➔ 10 ➔ 15secFader EffectFade Type-OffCurve Type-LinearDuration Time-5secSettingsLCD OFF Time-30secRecord SettingsBacklight-5secContrast-3Fader EffectSettingsFader EffectBacklight-5secContrast-3LCD OFF Time-30secAuto Power Off-5minNYH925AME INLAY 1/7/05 19:2912:0 Page 66