41Hold FeatureENGI Starting PointWhile playing a music file, press the A↔B button atthe beginning of the loop you want to set. A↔ appears in the display.Press the A↔B button shortly at the point you wishto end Loop Repeat. A↔B appears in the display. The loop is played repeatedly.Press the A↔B button briefly to cancel the loop.I Ending PointLoop RepeatingUse the Hold feature to lock and disable all buttons.Hold Function of the Main UnitActivate on the main unit.❈ All buttons on the main unit will be disabled, and only the buttons on the remote control can beused for input.❈ When you activate the HOLD switch, a " " appears on the display.Playing Music40I Playing MusicI Pausing Music Power On: Press and hold the √» button to turn on the power. Power Off: Press and hold the √» button to turn off the power.Press and hold the √» button Playback starts automatically.Press the √» button to pause playback. While in Pause mode, briefly press √» again to resumeplayback.Make sure the player is fully charged and the earphones are connected.Adjust volume by moving the SELECT button up and down. The volume can be adjusted in increments between 00(MIN) and 60(MAX).I Adjusting Volume