31Searching for Music/Voice FilesMP3 Encoding30✽ To move to other modes from the LINE_ENCmode,refer to page 37 "Changing Mode"1 Connect the Audio Output port on the external audio source(or the Line Out port) to the ENC port on the device with the Line cable.2 Press and hold the REC button to start MP3 encoding.● If the button is pressed, encoding is paused and if the button is pressed again,the encoding resumes.3 If the REC button is pressed during encoding, the encoding stops and anencoding file is created.● The files are encoded in the order of L001, L002....and saved as MP3 file in LINE_ENC folder after encoding.NNNN oooo tttt eeee- Bit Rates can be set within the range of 32Kbps~128Kbps. (see page 50).- Volume can be adjusted while monitoring the Encoding.✍NNNN oooo tttt iiii cccc eeee- Do not disconnect the Line cable during Encoding.- If the battery is not sufficiently charged, the player will not completely encode the file.- Adjust the volume of the external audio source to a suitable level and encode it.If the volume level is too high, the sound quality may be poor.✍● Push and hold the joystick left or right during playback to search forthe part you want to listen to.● Release the joystick to resume play normally.To search for specific parts during play● Push the joystick to the position briefly during playback to play the next track.● Push the joystick to the position briefly within 5 seconds after playback starts,to move to and play the previous track. Press the joystick to the position brieflyafter five seconds to play the current track from the beginning.To change tracks during play● Push the joystick left or right in stop/pause mode to moveto the previous/next track.To change tracks when stopped/pausedNNNN oooo tttt eeee- VBR(Variable Bit Rate) file: A file that constantly changes the compression rate accordingto the type of sounds, such as their pitch, in the file.- When playing a VBR file, you cannot move to and play the previous track even if you pushthe joystick to the position within 5 seconds after playback starts.- Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3may not play.✍YP MT6 AME 0.0 12/22/04 10:0812:0 Page 30