17Manual Installation of the USB Driver16Go to “Downloading/Uploading files” on page 20 if the USB driver is in place.Follow these steps if the USB driver is not in place :Check the device manager.● Windows 98/ME:Control Panel → System → Device Manager● Windows 2000 (Professional):Control Panel → System → Hardware →Device Manager● Windows XP (Professional):Control Panel → System → Hardware →Device Manager1Check if there is a device listed with anexclamation point or a question mark(displayed as unknown device or USB device).2Double click on the device listed with an exclamationpoint or a question mark.3After selecting the driver,click on [Update Driver].4 Select a compatible driver,click on [Next] to finish.5NNNN oooo tttt eeee● If you are using Windows 2000 and your version of Windows does not recognize the USB driver,please download and install the latest service pack from windowsupdate.microsoft.com● The installation method may vary depending on the type of PC or operating system.Contact your PC dealer or service center for installation information.● If errors occur continuously when you install the USB driver,reconnect the USB cable after rebooting your system.When an error occurs during installation of the USB driverYPT5_Eng_Can_Rev0.0 11/11/04 14:1212:0 Page 16