Connecting the USB cable➤ Before connecting the yepp to PC, make sure to install USB driver.Location of Controls21YP-T5 Quick GuideRecording ButtonPlay/Pause ButtonHold SwitchLoop Repeating ButtonUSB CableConnection PortENC JackNeck strap HookMENU, Navigation button/Move to Track/Speed Search/Volume ButtonDisplayEarphone JackBattery CoverMicrophoneConnect a USB cable to the USB port on thecomputer.Connect the other end of a USB cable to the USBcable connection port on the bottom of the yepp,and press the button on the main unit.● If you disconnect the USB cable from your PC whileimplementing a command or initializing during USBdriver installation, your PC may not function correctly.2Upon installation of the USB driver"SAMSUNG YP-T5" will appear in the[Start] → [Settings] → [Control Panel] →[System Properties] → [Device Manager].41USB driver is installed with a message saying thatit is searching for a new device. You may not seethe display screen during installation.Go to the device manager to check thatinstallation has been successfully completed.3USB connect cableTurning Power On and Off Playing MusicPausing Music● Power On : Press the button to turn on the power.● Power Off : Press and hold the button to turn off the power.Press the button.● Playback starts.Press the button to pause playback.● If no buttons are pressed within 10 seconds(changes depending on settings),the yepp automatically powers off.● While in Pause mode, briefly press again to resume playback.