Samsung galaxy tab 3 User Manual

Also see for Galaxy Tab3: User manual User manual User guide Guide User guide

Contents

Samsung galaxy tab 3 User Manual Manual pdf 63 page image

Web and Data 55Tip: You can also turn Bluetooth on and off through the Notifications panel. Drag the Notificationspanel down and touch Bluetooth to enable or disable Bluetooth.Note: Turn off Bluetooth when not in use to conserve battery power, or in places where using awireless device is prohibited, such as aboard an aircraft and in hospitals.Pairing with a Bluetooth DevicePairing initiates a connection between your tablet and the target device, usually by using a passcodeor PIN. After pairing, your tablet and the target device recognize each other and exchangeinformation without having to enter a passcode or PIN.1. Press and touch > Settings > Bluetooth.2. Touch the Bluetooth ON/OFF slider to turn Bluetooth on.3. Make sure that the target device is discoverable, so that your tablet can find it. Refer to theinstructions that came with the target device to find out how to set it to discoverable mode.4. Touch Scan. Your tablet will start to scan for Bluetooth devices within range.5. When you see the name of the target device displayed in the Bluetooth devices section, touchthe name. Your tablet then automatically tries to pair with the target device.l If automatic pairing fails, enter the passcode supplied with the target device.The pairing and connection status is displayed below the target device in the Bluetooth devicessection. When you are connected to the target device, (Bluetooth connected) displays in thestatus bar.Note: Due to different specifications and features of other Bluetooth-compatible devices, displayand operations may be different, and functions such as transfer or exchange may not be possiblewith all Bluetooth-compatible devices.Reconnect to a Bluetooth DeviceWhen you have paired your tablet with another device, you should be able to reconnect itautomatically by turning on Bluetooth on your tablet.1. Press and touch > Settings > Bluetooth.2. Touch the Bluetooth ON/OFF slider to turn Bluetooth on.3. Make sure that the target device is discoverable.4. Touch the target device’s name in the Bluetooth devices section.5. If prompted to enter a passcode, try 0000 or 1234, or consult the target device’s documentationto find the passcode.