Samsung ht-x250 Instruction Manual

Also see for HT-X250: Firmware update guide Instruction manual Instruction manual Service manual Service manual

Contents

ENGSETUP5150Settings (Con’t)Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to matchthe video.1 In Stop mode, press the MENU button.2 Press the Cursor button to move to

and then press the ENTER button.3 Press the Cursor button to move to

and then press theENTER button.4 Press the Cursor , button to select the AV-SYNC Delay Time and thenpress the ENTER button.You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.Press the RETURN button to return to the previous level.Press the EXIT button to exit the setup screen.Setting the AV SYNCThis feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digitalsound when watching movies at low volume at night.1 In Stop mode, press the MENU button.2 Press the Cursor button to move to

and then press the ENTER button.3 Press the Cursor button to move to and then press the ENTER button.4 Press the Cursor , button to adjust the DRC.When the Cursor button is pressed, the effect is greater, and when the Cursor button ispressed, the effect is smaller.Press the RETURN button to return to the previous level.Press the EXIT button to exit the setup screen.Setting the DRC (Dynamic Range Compression)MOVE ENTER EXITCHANGE EXITRETURNMOVE ENTER EXITRETURNMOVE SELECT EXITRETURNThe audio signals transmitted over the HDMI Cable can be toggled ON/OFF.1 In Stop mode, press the MENU button.2 Press the Cursor button to move to

and then press the ENTER button.3 Press the Cursor button to move to and then press theENTER button.4 Press the Cursor , button to select or and then press theENTER button.• ON : Both video and audio signals are transmitted over the HDMI connection cable, and audiois output through your TV speakers only.• OFF : Video is transmitted over the HDMI connection cable only, and audio is output throughthe home theater speakers only.Press the RETURN button to return to the previous level.Press the EXIT button to exit the setup screen.Setting the HDMI AudioMOVE ENTER EXITRETURNMOVE SELECT EXITRETURN• The default setting of this function is HDMI AUDIO OFF.• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.HT-X250(42~65P)-SEA 2007.3.7 6:39 PM Page 50Downloaded From TheatreSystem-Manual.com Manuals