ŝ42ŞContrastƈ You can set the difference between bright part of the image and dark part of theimage.- High : The difference between bright part ofthe image is high.- Normal : The difference between bright part ofthe image is normal.- Low : The difference between bright part ofthe image is low.Sharpnessƈ You can adjust the sharpness of the picture youare about to take. You cannot check thesharpness effect on the LCD monitor before youtake a picture, because this function is appliedonly when the captured image is stored on thememory.Icon Menu DescriptionSoft+SoftThe edges of the image are softened. This effect issuitable for editing images on your PC.The edges of the image are sharp.This is suitable for printing.The edges of the image are emphasized.The edges will appear sharp, but noise may occurin the recorded image.Vivid+VividNormalƈ You can select your preferred Auto Focus type according to the shootingcondition.- Center AF : The rectangular area in the center ofthe LCD monitor will be focused- Multi AF : This camera selects a AF point fromthe 5 AF points.ſ When the camera focuses on the subject, the auto focus frame turns to green.When the camera doesn't focus on the subject, the auto focus frame turns to red.Auto Focus type[Center AF] [Multi AF]RECORDINGSharpness Soft+Contrast SoftAuto Focus NormalVoice Memo VividVoice Record Vivid+RECORDINGSharpnessContrast HighAuto Focus NormalVoice Memo LowVoice RecordBack Set OK[PROGRAM mode]RECORDINGSharpnessContrastAuto Focus Center AFVoice Memo Multi AFVoice RecordBack SetOKBack SetOK