setting up _1301 SETTING UPBe careful not to miss the parts of refrigerator.3. Next, remove the door from the lower hinge 6 bycarefully lifting the door straight up 7 .Be careful not to pinch the water tubing andwire harness on the door.4. Remove the lower hinge 8 from the bracket 9by gently lifting the lower hinge upwards.2. Insert the 2 clips in the install pack and check thateach clip holds the line firmly.Do not cut the water line. Gently separate itfrom the coupler.Removing the freezer doorA few things to mention first.• Make sure that you lift the door straight up so thehinges are not bent or broken.• Be careful not to pinch the water tubing and wireharness on the door.• Place doors on a protected surface to preventscratching or damage.1. With the Freezer door closed, remove the upperhinge cover 1 using a screwdriver, and thendisconnect the wires by gently pulling them apart2 .2. Remove hinge screws 3 and the ground screw4 by turning counter-clockwise, and take off theupper hinge 5 . Be careful that the door does notfall on you as you are removing it.1 2- on some models- on some models5436798clip A (1/4”)clip A (1/4”)(6.35mm)(6.35mm)