Samsung series 5 530 User Manual

Basic FeaturesDialog Cladty (Off / On) ..............................................................................................................................SPDIF Output(standard sound mode only)Dialog Clarity emphasizes voice while maintaining thebackground sound level.Preferred Language ..................................................................................................................................................(digital channels only)DigitaI-TV broadcasts are capable ofsimultaneous transmission of manyaudio tracks (for example, simultaneoustranslations of the program into foreignlanguages),You can only select a language amongthe ones being broadcasted.SPDIF (Sony Philips Digital Interface)is used to provide digitalsound, reducing interference going to speakers and variousdigital devices such as an A/V Receiver/Home theater.Ill Audio Format : During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF)format from the options PCM or Dolby Digital.By connecting to 5,1ch speakers in a dolbydigital setup, maximize your interactive 3D soundxperience.Ill Audio Delay: Correct audio-video sync problems, whenwatching TV or video, and when listening to digital audiooutput using an external device such as an AV receiver(0ms- 250ms),Multi-Track Sound (MTS)(analog channels only)Ill Mono: Choose for channels that arebroadcasting in mono or if you arehaving difficulty receiving a stereo signal.Ill Stereo: Choose for channels that arebroadcasting in stereo.Ill SAP: Choose to listen to the SeparateAudio Program, which is usually a foreign-languagetranslation.Depending on the particular program being broadcast,you can listen to Mono, Stereo or SARAuto Volume (Off/Normal/Night)To equalize the volume level on each channel, set to Normal.Ill Night: This mode provides an improved soundexperience compared to Normal mode, making almostno noise, it is useful at night.Speaker Select(External Speaker / TV Speaker)A sound echo may occur due to a difference in decodingspeed between the main speaker and the audio receiver.In this case, set the TV to External Speaker.When Speaker Select is set to External Speaker, thevolume and MUTE buttons will not operate and thesound settings will be limited.When Speaker Select is set to External Speaker, youshould use these settings.* TV Speaker: Off, External Speaker: OnWhen Speaker Select is set to TV Speaker, youshould use these settings.* TV Speaker: On, External Speaker: OnIf there is no video signal, both speakers will be mute.Sound ResetReset all sound settings to the factory defaults.Setting the Time[_ MENurm -_Setup-_Time-_ ENTERE_TimeThe current time will appear every time you press the_NFO button.Ill Clock: Setting the clock is for using various timerfeatures of the TV.If you disconnect the power cord, you have to setthe clock again.Clock Mode: Set up the current time manually orautomatically,- Auto: Set the current time automatically using thetime from the digital channel,The antenna must be connected in order to setthe time automatically,- Manual: Set the current time manually,Depending on the broadcast station and signal,the auto time set up may not be correct. In thiscase, set the time manually,Clock Set: Set the Month, Day, Year, Hour, Minuteand am/pm,Available only when Clock Mode is set toManual.You can set the Month, Day, Year, Hour andMinute directly by pressing the number buttonson the remote control.8 English