Samsung series 5+ 550 User Manual
Also see for 550 Series: Quick setup guideUser manualUser manualUser manualQuick setup guide
                                                                                                                                                                                                                                                      | |
Contents
|
Plug & Play (Initial Setup)When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn onthe TV, press the POWER button.✎ Plug & Play is available only when the Source is set to TV.✎ To return to the previous step in the Plug & Play sequence, select Previous, and then press ENTER.✎ Before turning on the TV, make you have connected the TV to an antenna or cable connection (p. 8).1 Selecting the OSDLanguagePress the or button to select a language. Press ENTER twicewhen done.2 Selecting the usagemodePress the or button to select, and then press the ENTER buttontwice. Select the Home Use mode. Store Demo mode is for retailenvironments.3 Setting the ClockModePress the or button to select Auto or Manual, and then pressENTER twice.✎ If you selected Auto, you’ll go to the Time Zone and DST screen. Select Time Zoneor DST, and then press ENTER. On the Time Zone screen, use the or button to select your zone, and then press ENTER. On the DST screen, press,ENTER, then select whether to turn DST (Daylight Savings Time) on or off. Whendone, press ENTER.✎ If you selected Manual, you’ll go to the Date and Time screen. Select Date or Time,and then press ENTER. Then, use the number buttons or the or button toset the date or time. Use the or button to move between entry fields. Whendone setting the Date and Time, select Next, and then press ENTER.4 Selecting searchoptions for auto tuningPress the or button to select Air or Cable, and then press ENTER. A checkappears on your selection. Select Next, and then press the ENTER button. You cancheck both if you have both connected.✎ If you selected Cable, you’ll go to the Cable System screen. Use the or button to select Digital or Analog, and then press. ENTER. Use the or button to select the correct cable signal format - STD, HRC, or IRC - and then pressENTER. Most cable systems use STD. Select the correct cable signal format forboth the Digital and Analog systems.✎ When done, select Next, and the press ENTER.5 Selecting andmemorizing channelsThe channel search will start automatically. This can take up to 30 minutes.For more information, refer to Channel 3 Auto Program in the e-Manual.✎ Press the ENTERbutton at any time to interrupt the memorization process.6 Network Setting / Enjoyyour TVIf you want to watch a broadcast program, select Enjoy your TV. You can also set upthe Network connection. If you want to set up the network, select Network Settings.The Network Settings screen will appear. For more detailed information, refer to “NetworkConnection” in the e-Manual.If You Want to Rerun Plug & Play... MENU 3 System 3 Plug & Play 3 ENTER✎ NOTE To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.When you see the volume bar on the screen, press and hold the MENU button on the TV for 5 sec.PPOWER |
Related manuals for Samsung 550 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine