Samsung series 5+ User Manual

Also see for 5+ SERIES: Quick setup guide Quick setup guide Quick setup guide Quick setup guide Quick setup guide

English - 6Initial SetupWhen the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Setup is available only when the source is set to TV.1. Menu Language: Selecting a menu languagePress the ▲ or ▼ button, then press the ENTERE button.Select the desired OSD (On Screen Display) language.2. Use Mode: Selecting Store Demo or Home UsePress the ▲ or ▼ button, then press the ENTERE button.Select the Home Use mode. Store Demo mode is for retail environments.✎ When pressing TV controller, the function menu screen appears. Select the MENU(m) and press it more than 5 secondsusing the controller. The Store Demo mode is set.✎ Cancel the Store Demo by selecting Source( ) and pressing it more than 5 seconds.✎ Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when youwatch at home.3. Country (Depending on the country): Selecting a countryPress the ▲ or ▼ button, then press the ENTERE button.Select the appropriate country.✎ After selecting the country in the country menu, some models may proceed with an additional option to setup the pin number.4. Auto Tuning (Step 1): Selecting how you watch your TVLet’s find and store channels on your TV. Do you need to search for channels?• Yes, I need to.: Memorises all of the available channels using RF cable.• No, I don’t need to.: You don’t need to use Auto Tuning to find channels.5. Auto Tuning (Step 2): Selecting a search optionsSelect the desired broadcasting signal and antenna source. Press the ▲/▼/◄/► button, then press the ENTERE button.When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to thechannels. For more information, refer to Channel → Auto Tuning.✎ Press the ENTERE button at any time to interrupt the memorisation process.✎ See e-Manual chapter “Retuning Channels > Auto Tuning”6. Clock: Setting the Clock Mode• Auto: Set the current time automatically.• Manual: Allows you to manually set the current date and time.7. Time Zone (Depending on the country): Setting your Time ZoneThis step is only available when the clock mode is set to Auto.• Auto: Set the time zone automatically.• Manual: Set the time zone manually.✎ If you selected Manual, you can select whether to turn DST (Daylight Savings Time) On or Off. (Depending on thecountry)8. Setup CompletePress the ENTERE button.✎ The completed settings are displayed.If You Want to Reset This Feature...Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change thePIN number, use the Change PIN function.You should do Setup (MENU → System) again at home although you did in shop.✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to“0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on)