Samsung series 8 8500 User Manual

Also see for UN46B8500: Manual Safety instructions User manual Specification sheet Manual Del Usuario

Contents

Setting the Network[] Network TypeSelect Cable or Wireless as the method to connect to the network.The menu is activated only if the 'Samsung Wireless LAN Adapter' is connected.CableConnect to the network using a cable.WirelessConnect to the network wirelessly.[] Network SetupCable Network Setup (when Network Type is set to Cable)Please check if the LAN cable is connected.• Internet Protocol Setup _ Auto Setup / Manual Setup• Network Test: You can test or confirm the network connection status after setting up the network.When unable to connect to a wired networkIf your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first timeand authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internetas the MAC address differs from that of the device (PC).In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV)to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV maynot be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internetusing an Internet Sharer (Router).The internet connection may fail due to a firewNI problem. In this case, contact your Internet service provider. If you cannotconnect to the Internet even if you have followed the procedures of your Internet service provider, please contact SamsungElectronics at 1-800-SAMSUNG.Cable Network Setup=Auto SetupIf you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings areautomatically configured.1. Set Network Type to Cable.2. Select Cable Network Setup.3. Set Internet Protocol Setup to Auto Setup.The Internet Protocol is set automatically.4. Select Network Test to check the network connectivity.Cable Network Setup=ManualTo connect the TV to the LAN using a static IP address, you must set up the Internet Protocoldp).1. Set Network Type to Cable.2. Select Cable Network Setup.3. Set Internet Protocol Setup to Manual Setup.4. Set up IP Address, Subnet Mask, Gateway and DN8 Server.Press the number buttons on the remote control when you set the Network manually.6. Select Network Test to check the network connectivity.Wireless Network SetupThe menu is activated only if the 'Samsung Wireless LAN Adapter' is connected.• Internet Protocol Setup _ Auto Setup / Manual Setup= Network Test: You can test or confirm the network connection status after setting up the network.[8500-NA]BNdS-02322C-Eng.indb 34 2009-07-28 C- 11:23:27