1716Connect a USB cable to the USB port on the computer.Connect the opposite end of the USB cable to the USB cableport on the right side of the yepp.● If you disconnect the USB cable from your PC whileimplementing a command or initializing duringUSB driver installation, your PC may not function correctly.5Upon installation of the USB driver"SAMSUNG YP-60" will appear in the[Start] → [Settings] → [Control Panel] →[System Properties] → [Device Manager].74The USB driver is installed with a message saying thatit is searching for a new device. You may not see thedisplay screen during installation.Go to the device manager to check thatinstallation has been successfully completed.6USB connect cableHow to check the USB driver● Windows 98/ME:Control Panel → System → Device Manager →Disk drives → SAMSUNG YP-60● Windows 2000:Control Panel → System → Hardware →Device Manager → Disk drives →SAMSUNG YP-60 USB Device● Windows XP:Control Panel → System → Hardware →Device Manager → Disk drives →SAMSUNG YP-60 USB DeviceWhen the USB driver is not installed automatically, refer to the next page.8Connecting the yepp to a PC with a USB cableConnecting the yepp to a PC