6Voice RecordingRecording the voice messages1 Press the MODE button on the main unit to switchinto the voice mode.- Voice mode can only be activated in the stop mode.2 Press the REC button and the voice messages will berecorded through the microphone.- Press the Stop button ( ) to stop recording. If yourepeat this operation over and over, the voicemessages will be recorded in the sequence ofV001, V002....V00N.NNoottee- This feature allows you to easily record lectures at school orinstitute, interview and conference messages, etc. It thereforeenhances study effectiveness and lets you keep importantthings for a long time.- The player will automatically stop recording when the memorybecomes full.- The voice messages are recorded on the built-in memory. If thememory is short in capacity, however, they will be recorded onthe smart media card (in the sequence of V001, V002... V00N).- Be careful not to press the Erase button long because theerasing function may run.- Voice recording is made only on the main system.Playing the recorded voice messages1 Use the FF ( ) and REW ( ) buttons to select thetrack (V001, V002...) you prefer.2 Press the button to playback the selected track.You can pause the track by pressing the buttononce again.- Press the button again to resume playback.NNoottee- When you press the button without selecting V001,V002... V00n, you can listen to the recorded track that appliesto the number currently shown on the LCD panel.- Press the FF or REW button during playback to move forwardor in reverse at a faster speed.Playing the recorded voice messages1 Use the FF and REW buttons to select the track (V001,V002...) you want to erase.2 Press the ERASE button for at least 1 second and themessage "Erase?" will appear on the LCD panel. Thenpress the button to erase the selected track.NNoottee- To cancel the erasing function press the button.- After the selected track is erased, the player will show the nexttrack number.1_eng_nd 00/12/5 1:47 PM Page 6