19(3) COURSE-UPa) Make the ship’s head bearing always indicateCourse-up when the course is set.b) Even though ship’s head direction is changed,ECHO image bearing does not change butship’s head moves as much as the variation ofship’s head bearing.c) When you change the track widely, set thecourse up again from the MENU.d) It requires the equipment like GYROCOMPASS to obtain bearing reference.<Ship’s head line moves clockwise><In case that Course-up is reset>4.3.16. To change the way of bearingdisplayMenu screenMove to FUNC/DISPLAY SET, Move to BEARING, press, Move to True /Magnetic, pressBack to PPI screen(1) True Bearinga) True bearing indication is set based on TrueNorth with Scale 0.b) It requires the equipment like GYROCOMPASS to obtain bearing reference.(2) Magnetic Bearinga) Magnetic Bearing indication is set based onMagnetic North with Scale 0.b) MAGNET COMPASS is needed.4.3.17. To change the way ofdisplaying bearing ine/cursor When you display the value of cursor or EBLbearing, select between the own ship and TrueNorth as a base.Menu screenMove to FUNC/DISPLAY SET, Move to EBL/CSR READ OUT,press, Move to Relative / True/Mag. ,pressBack to PPI screen(1) ‘Relative’ indication Make the Cursor, and the Bearing value of EBLindicate based on Ship’s headline (Ship’s head Lineis “0º”)(2) True North Indication Make the cursor, the bearing value of EBL indicatebased on True North.(True North is “0º”)When the own shipmoves clockwise.