Santak CASTLE Series User Manual

Also see for CASTLE Series: User manual User manual User manual User manual Operation and maintenance manual

Santak CASTLE Series User Manual Manual pdf 12 page image

-3-2. Panel DescriptionThe display panel of 1K/1KS/2K/2KS/3K/3KS is the same, which is shownas below:■ Figure 2.1 The Display Panel2.1 ButtonSwitch FunctionON/OFFButton1. By pressing the button continuously for more than 500ms theUPS system is turned on.2. When mains power is normal, by pressing the buttoncontinuously for more than 500ms the UPS system switches to nooutput or Bypass mode, and the inverter is off. At this moment, ifBypass is enabled, then the output sockets are supplied withvoltage via the bypass if the mains power is available.3. Release the UPS from fault mode.Fault mode released:After the fault occurs, the UPS will shut down the inverter output toenter the failure mode, press the button for more than 500ms