Sanyo 263 Instruction Manual

Memorizing the Channels15Selecting the Tuning BandThis unit can automatically find all channels available through antenna or cable inputs, and store them in memory.Before your TV can memorize the available channels, you must specify the type of signal source that is connectedto the unit. (i.e., an antenna or cable system)Auto Channel SearchPress MENU to display the menu main page.1 Press repeatedly to select menu.5or 6 Setup2Press OK or to access the submenu.43Press OK or to select the Tuning Band.4Air, Cable, Cable HRC, Cable IRC and Cable Auto can be selected.If using antenna, select Air;If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area’s cablesystem Normally please select Cable Auto. (For further band information contact your cable serviceprovider.)4 Press to select .5or 6 Tuning Band item5Navigate to the Setup sub-menu and highlight Auto Ch Search.12 Press OK or to begin the auto channel search.The unit will automatically search for all available TV/DTV (ifusing antenna), CATV/CADTV (if using cable) program.Note: if you want to stop the auto-search, press EXIT button.Digital (CADTV) cable systems may cause severalunviewable channels to be memorized.4VideoTuning BandDTV SignalAirTo Move To Select To ExitAudioSetupFeature OK ExitAdd On Channel SearchNavigate to the Setup sub-menu and highlight Add On Ch12 Press OK or to begin the a channel search.The unit will automatically search for new programs and add themto the program list.4 dd onNote: If you want to stop the search, press EXIT button.Auto Ch SearchManual Ch SetChannel LabelsAdd On Ch SearchVideoTuning BandDTV SignalAuto Ch SearchManual Ch SetChannel LabelsAirTo Move To Select To ExitAudioSetupFeature OK ExitAutoprogram MenuChannel 12Channels FoundProgress (%)Found37Add On Ch SearchAuto On Ch SearchVideoTuning BandDTV SignalAuto Ch SearchManual Ch SetChannel LabelsAirTo Move To Select To ExitAudioSetupFeature OK ExitAdd On Ch SearchManual Channel SetNavigate to the Setup sub-menu and highlight Manual Ch Set.12 Press OK or to open Manual Channel Set Menu sub-menu.4After setting channels into memory, you can add or delete channelsfrom the default channel list as follows:3 Use to5 or 6 button select a channel, then press the OK buttonto add or delete the channel.4 Press EXIT button to exit.Now when you use CH+/- buttons to cycle among the channels,the deleted channels can not be selected.VideoTuning BandDTV SignalAuto Ch SearchManual Ch SetChannel LabelsAirTo Move To Select To ExitAudioSetupFeature OK ExitAdd On Ch SearchAfter initial auto channel search, you can make use of Add OnChannel Search option to search for new programs and add them to