Sanyo CE28DN5-C Service Manual

Contents

Sanyo CE28DN5-C Service Manual Manual pdf 7 page image

-7-C2WVVOPTION SETTING[After replacing the Memory IC (IC803)]The memory IC, IC803, stores the option data of TV set and service adjustments data for each circuit, therefore,when the memory IC is replaced, it should be performed following setting and “SERVICE ADJUSTMENT” on nextpage.To enter to the Option Mode+ Press and hold the F/OK button on the remote control and Pt button on the front panel of the TV. The optionwindow will appear on the screen. Set the options as shown below.To set the option mode+ Highlight the desired option item by using the Ps or Pt button .+ To switch the option mode, use the Volume - (LEFT) or Volume + (RIGHT) button.+ The data which is set in the option mode is stored into the memory IC automatically.Following table shows the available option items and default setting mode.Exit from the Service Mode+ Press the RECALL button.Option Mode Mode Description & NoteON-TIMER ON or OFF On-timer available, default “ON”SORT MODE AUTO TUNE/SORT Tuning mode, default “AUTO TUNING”or AUTO TUNINGor ATS EURO PLUSPLUG & PLAY ON or OFF Plug & Play mode, default “ON”WELCOME TEXT ON or OFF Display message when first set up, default “OFF”CODE TEST OFF or ON For factory use, default “OFF”WSS ON or OFF Wide Screen Signaling available, default “ON”WIDE ON or OFF Wide mode, default “ON”OPTION 4 or 7 LANGUAGE Language option , default “4 LANGUAGE”312/313 Mode ON or OFF Teletext mode, default OFFAV3 OPTION ON or OFF Front AV disable, default ON3D SURROUND ON or OFF 3D Surround available, default ONSIF OPTION BG, I, L/L’ or BG or BG/DK Television default system, Default “BG, I, L/L’”OPTIONON-TIMER ONSORT MODE AUTO TUNINGPLUG & PLAY ONWELCOME TEXT OFFCODE TEST OFFWSS ONWIDE OFFOPTION 4 LANGUAGE312/313 Mode OFFAV3 OPTION ON3D SURROUND ONSIF BG ONLYADJUST : EXIT : RECALL