Sanyo DP 42848 Owner's Manual

Also see for DP42848: Owner's manual Service manual

Contents

Sanyo DP 42848 Owner's Manual Manual pdf 10 page image

9Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032INITIAL CHANNEL SEARCH7 Press the CHANNEL (Up) key to searchfor signals connected to the Antennaterminal.Channel Search will check for Antenna andCable signals. If Antenna signals are detected,the HDTV searches for both analog and digitaloff-air channels. If Cable signals are detected,the HDTV will search for analog Cable channels.Channels are stored in Channel Memory andcan be scanned using the CHANNEL (Up)and (Down) keys.If no Antenna signals are detected, the HDTVwill begin an AV search.If neither of these searches detected a validsignal, the HDTV will tune to input Video1.INITIAL DISPLAYAV SEARCHNOTE:Be sure all the external video devices you con-nected to the HDTV are powered ON beforeyou begin an AV Search.8 Press the CHANNEL (Down) key tosearch for signals from devices you con-nected to the AV input jacks (Initial Display).AV Search will begin checking the AV inputs forvalid signals, beginning with input Video1.When a valid signal is detected, the searchprocess ends and the HDTV tunes to that inputsource.If a valid signal is not detected on any of the AVinputs, the HDTV will tune to input Video1.CHANNEL SEARCH DISPLAYAV SIGNAL SEARCH DISPLAYGETTING STARTED—POWER CONNECTION / CHANNEL SEARCHPOWER CONNECTION5 Plug in AC power cord(120V AC, 60 Hz).6 Press the POWER key.(Follow the on-screeninstructions.)To 120V AC outlet.This Manual: http://www.manuallib.com/file/2689172