Sanyo DP19241 Owner's Manual

Also see for DP19241: Setup guide Service manual

Contents

16To connect the TV to a PC (Personal Computer)NOTE: Before connecting any cables, disconnectthe AC Power Cords of both the TV and PersonalComputer from the AC outlets.1 Connect an RGB cable from the monitor output (a)on your PC to the RGB connector on the TV andtighten the screws. (Monitor Cable not supplied.)NOTE:If Computer has only DVI Output (b), a DVI to RGBconverter will be required (converter not included).2 Insert one end of a Stereo Mini-Audio cable intothe PC Audio Out jack and the other end into theTV PC/DVI AUDIO Input jack. (Stereo Mini-AudioCable not supplied.)HINT:Volume can be adjusted both from the PC and the TVVOL +/–.3 Press the INPUT SELECT on your RemoteControl to step through signal inputs to select PC.4 Press the MENU to display the TV’s PC Settingmenu. Select “Auto Adjust”.NOTE:Power on the TV and any other peripheralequipment before powering on the computer.NOTE:Save and close all documents, in case computer might need to be restarted.Before connecting your computer to your TV, please refer to the following chart to set to a compatibleresolution.A Refresh Rate value of 60 Hz on your computer is recommended for your TV.•••Rear of the unitRGB DVI JACK(a) (b)VGA cable (not supplied)Audio cord (not supplied)RESOLUTION ASPECT RATIO REFRESH RATE(Hz)HORIZONTALFREQUENCY(kHz)VERTICALFREQUENCY (Hz)640 x 480 4:360 31.47 59.9472 37.86 72.8175 37.50 75.00720 x 400 18:10 70 31.47 70.00800 x 600 4:356 35.16 56.2560 37.88 60.3272 48.08 72.1975 46.88 75.001024 x 768 4:360 48.36 60.0070 56.48 70.0775 60.02 75.031280 x 768 15:9 60 47.78 59.871280 x 720 16:9 60 45.00 60.001360 x 768 16:9 60 47.71 60.00Connections to other equipmentTo PC MONITOR INTo PC/DVIAUDIO IN3FR0321A_En.indd 163FR0321A_En.indd 16 1/7/11 4:32:12 PM1/7/11 4:32:12 PM