1. REMOVAL OF MECHANICAL PARTSAND P.C. BOARDS (Refer to Fig. 1-3)1. Turn up set and put the Front Cabinet Ass'y of LCDCAUTION on the top.Be careful not to remove the LVDS cable forcibly, because 2. Remove the Front Cabinet Ass'y in the direction ofthe LVDS cable may be damaged. arrow (A).3. Disconnect the following connector: (CD2801).4. Remove the LCD Panel in the direction of arrow (B).1-1: STAND ASS'Y (Refer to Fig. 1-1)1. Remove the 2 screws (1).2. Remove the Stand Ass'y in the direction of arrow.DISASSEMBLY INSTRUCTIONS1-3: FRONT CABINET ASS'Y and LCD PANEL(1) (1)Fig. 1-1Stand Ass'y(A) Front Cabinet Ass'yB1-11-2: COVER INVERTER (Refer to Fig. 1-2)1. Remove the screw (1).2. Remove the Cover Inverter in the direction of arrow.3. Disconnect the following connectors:(CP7001 and CP7002).4. Remove the 2 screws (2)5. Remove the 6 screws (3)Fig. 1 1(2)(1)Cover InverterFig. 1-2(3)(2)(3)(3)(3)(3)(3)Fig. 1-3Back Cabinet Ass'y(B)LCD PanelCD2801(LVDS Cable)B1-1