Sanyo DP26649 Service Manual

Also see for DP26649 - 26" LCD TV: Owner's manual Setup guide Service manual

– 6 –MECHANICAL DISASSEMBLYCAUTION: This LCD TV uses several different kinds of screws. Using the correct screw is necessary toprevent damage. Lead wires must be redressed to their previous locations after servicing.B BSTAND REMOVALPosition TV face down on a padded or cushioned surfaceto protect the screen and finish.Remove 4 screws (B: 6X16) to take the stand off.BACK CABINET REMOVAL1. Remove the screws shown in figure.(C:3x14, 10 pcs.; D4x8, 4 pcs.; A3x6, 1 pcs.)2. Lift the back cabinet and remove the lead wire connector.3. Take the back cabinet off.CCDDCDC CC CC CCDAMain BoardPower UnitC CCCCCCCCCCCC[ATTENTION]Please do not tighten the (D) screw too strongly when youinstall the back cabinet againg. The screw comes not to betightened.MAIN BOARD REMOVALRemove 7 screws (C:3x6) to take the main board off.POWER UNIT REMOVALRemove 6 screws (C:3x6) to take the power unit off.