Sanyo DP32746 Owner's Manual

Also see for DP32746: Connection guide Service manual

Sanyo DP32746 Owner's Manual Manual pdf 15 page image

15Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032ANALOG AV CONNECTIONSSwitch off DTV and external equipment beforeconnecting cables.(Cables are not supplied.)BACK VIEW OF VCRDTV AVINPUTJACKS1 Connect VCR’s Audio Video Out to theDTV’s VIDEO1 jacks.NOTE: For Mono VCR (Single Audio Jack),connect VCR Audio Out to DTV Audio (L)Input.22 OptionalConnect VCR’s S-Video Out to the HDTV'sS-Video In Jack.NOTE: S-Video jack connections overrideVIDEO1 Video jack connection.3 Press POWER to turn on the DTV, then turnon external equipment.4 Press INPUT to selectVideo 1 to view the VCRprogram.What you will need for connections:Audio Video Cable – 1S-Video Cable – 1S-VIDEOJACK1REMOTE CONTROL4 322 Press the INPUT key after connecting cables to accessthe VIDEO1 input. There is NO need to tune to a blankchannel. “No Signal” will appear randomly on the screen whenno signal is detected at the VIDEO1 video jack.IMPORTANT NOTE FOR MONITOR USE:If you did not connect an antenna, you mustrun All Channel Search twice before you canselect the AV inputs.NOTES: Don’t be fooled by thephrase “Available inHigh-Definition.” Com-posite jacks offer only480i (SDTV) resolution.To view available High-Definition (HD) pro-grams, you must con-nect your HD equipmentto the Component orHDMI jacks.Video 1USING THE ANALOG VIDEO JACKS TO CONNECT A VCR(OR OTHER ANALOG DEVICE)