Sanyo DP42647 Owner's Manual
Also see for DP42647: Owner's manualOwner's manual
                                                | |
Contents
| 
11OPTIONAL FEATURESWALL MOUNTINGUse the threaded inserts on the back of your DTV tosecure it using a wall mounting kit. (VESA standard inter-face 200 x 200.)Note: Wall Mounting kit is not supplied.LCD Mounting screws measurements:M6 Diameter, Length—12mm (maximum).REMOVING THE DTV STAND(Optional)Tools Needed: Phillips screwdriverImportant Note: Place DTV face down on a paddedor cushioned surface to protect the screen and finish.Handling by more than two people is recommended.1 Remove four (4) screws from the metal bracket.CAUTION: Hold the stand firmly as you remove thelast screw.2 Carefully remove the DTV stand.DTV BACK VIEWPOSITIONING THE LCD DTVAlways use an appropriate table or stand when positioning your DTV. Do not position the DTVin a confined area. Allow adequate space for proper ventilation.Note: All dimensions are in inches. |
Related manuals for Sanyo DP42647
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine