DS19310Model:COLOR TELEVISIONASFILE NO.G8EEM, PRODUCT CODE 111355483 REFERENCE No. SM5110224-01NoticeCORRECTIONSERVICE FLASHPRODUCTION CHANGEADD INFORMATIONPlease add this notice to the Service Manual listed below. REVISION 1Category:U.S.A. / CANADADestination:AUGUST / 14 / 2001Date:19310-01Effective from: Chassis No.SM5110224REF: No.NOTE: Match the Chassis No. on the unit’s back cover with the Chassis No. in the Service Manual.If the Service Manual Chassis No. does not match the unit’s, additional Service Literature isrequired. This chassis is similar to Chassis No. 19310-00. Only the Difference ServiceInformation is given in this manual. For detailed Service Information, refer to the Original ServiceManual and Notices for Chassis No. 19310-00 used in Model DS19310 (SM5110224).INITIAL BUS DATA SETUPNote: When IC802 (EEPROM) is replaced, the Service Menu No. 001 HP (H Phase), No. 013 TDS (Trap & D SW), No. 014 AF(Auto Flesh), No. 024 AG (AFC Gain), No. 026 SCO (Sub-Color), No. 027 STI (Sub-Tint), and No. 031 HR (OSD Display H-Position)should be set up for proper TV operation before attempting the service adjustments.1. Disconnect the AC power cord (AC 120V line).2. While pressing the MENU key, reconnect the AC power cord. The Service Menu display will now appear.3. Select No. 001 HP (H Phase) with or key. Adjust the data with + or – key for 14.4. Select No. 013 TDS (Trap & D SW) with or key. Adjust the data with + or – key for 1.5. Select No. 014 AF (Auto Flesh) with or key. Adjust the data with + or – key for 1.6. Select No. 024 AG (AFC Gain), with or key. Adjust the data with + or – key for 0.7. Select No. 026 SCO (Sub Color) with or key. Adjust the data with + or – key for 7.8. Select No. 027 STI (Sub Tint) with or key. Adjust the data with + or – key for 20.9. Select No. 031 HR (OSD Display H-Position) with or key. Adjust the data with + or – key for 28.10. Press the MENU key to turn off the Service Menu display.1. IN THE SERVICE ADJUSTMENTS LISTPAGE 3