Sanyo DS25520 Owner's Manual

Also see for DS25520: Owner's manual Owner's manual Service manual Manual Manual

Contents

Sanyo DS25520 Owner's Manual Manual pdf 7 page image

7USING THE MULTIMEDIA REMOTE CONTROLREMOTE CONTROL KEYS➀Mode Keys—Use these keys to program theremote control and to select the operating mode(VCR, TV, or AUX). To Operate Your...VCR—Press the VCR key; Cable Box or DVDPlayer—Press the AUX key; and Television—Pressthe TV key.Note: Make sure you hold down the mode keywhile entering a code number, see page 8.➁Input Key—Press to select the program source towatch: TV signal or signal from the DVD Player orother equipment you have connected to the A/Vjacks.➂Number Keys—Two keys must be pressed to selecta channel. Example: Press 0 then 6 to select channel6. For cable channels 100 through 125, press andhold the 1 key until C1–– appears. Then press theother two numbers.➃Caption Key (See page 12.)➄Menu Key—Use this key with the / and – /+keys to navigate and adjust features of theon-screen menu system (see pages 11 ~ 12).➅Channel Scanning (CH /) and Volume(VOL – /+) Keys—Press to scan through thechannels in memory and to adjust the volume.➆Mute Key—Press once to minimize the volume.Press again to restore. Note: When using the audioout jacks this key will not mute the sound.Operates your TV, VCR, DVD, and Cable converter box. To program the remote control,see pages 8 ~ 10.INSTALL BATTERIES AS SHOWN (2 AA, not included)Notes:– Do not mix old batteries with new ones or mixdifferent types of batteries together.– Remove the batteries if the remote control will not be used fora month or more. Weak batteries may leak and cause damage.(Normal battery life is roughly six months.)IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposedof properly in compliance with all applicable laws. For detailed information,contact your local County Solid Waste Authority.QuickTips Be sure batteries areinstalled correctly. Point the remotecontrol toward theequipment you wantto operate. Objectsbetween the remotecontrol and the equip-ment may causemisoperation of theremote controlfunction. If the remote controldoes not work: PressT V key (see item 1). The remote controlmust be programmedbefore it will operateyour VCR, DVD, orCable Box. Seepages 8~10. Cannot selectchannel with numberkeys. Press “0”infront of numbers1 ~ 9. Example:Channel 05. Adjusting the volumelevel: Right flashingarrow indicatesvolume is increasingand Left flashingarrow indicatesvolume is decreasing.Need help?Visit our Web site atwww.sanyoctv.comor Call 1-800-877-5032RECALLDISPLAYMUTEMENUCAPTION SLEEPRESETINPUTCHVOL VOLPOWERVCR TV AUX1 2 34 5 67 8 901 2 34 5 67 8 90➀➁➂➃➄(Continued on page 8.)➅➆