Sanyo DSR-5016PA Instruction Manual

Contents

Sanyo DSR-5016PA Instruction Manual Manual pdf 11 page image

10 EnglishAdditions and Changes to Network Operations2The following menu items have been added to the “ALARM NOTICE SET” screen under “ADVANCED MENU SET”.These menu items are not available on the DVR side.1 Support for SSL communicationsNow you can send alarm notifications via SSLcommunications.[Settings] ( indicates default setting)2 Specifying the SMTP port numberEnter a port number you want to use for SMTP (send)within the range of 0 to 65535. (Default: 25)3 Specifying the POP3 port numberEnter a port number you want to use for POP3 (receive)within the range of 0 to 65535. (Default: 110)4 Sending warning notificationsYou can configure the main unit to send warning notificationmail messages when the following problems are detected inthe functionality and operation of the main unit.You can configure the warning notification feature the sameway as the alarm notification feature. All settings default to“OFF”; turning “ON” an item causes the main unit to sendwarning mail when the corresponding condition is detected.z HDD:The hard disk is faulty.z V. LOSS:The video signal is disconnected.z FAN:The fan is faulty.z NON REC:The DVR has stopped recording.z FULL:Any one of the recording areas on the hard disk hasreached the “remaining-space” warning level or hasbecome full.z POWER:The power has turned off and back on again.z When you want to use the warning notification feature,choose “ON” in the “ALARM NOTICE” column A.z The “USE” column B controls the settings for alarmnotification, and does not affect the warning notificationfeature. Regardless of the settings in the “USE” column,notifications with “ON” settings are in effect.Newly Added Alarm Notification Menus (P201)2143AB(added)(added)(added)(added)Setting DescriptionOFF Disables SSL support.ON Enables SSL support.