Sanyo DSR-M804 Series Service Manual

Contents

− 6 −Fig. 12. DISASSEMBLY2-1. REMOVAL OF CABINET AND CIRCUIT BOARD LOCATIONSF A I LURE – – – – – – – : – –RECOVER – – – – – – – : – –DISK1 USE : 0 0 0 0 0 HDISK2 USE : – – – – – HPOWER : 0 0 0 0 0 HERROR RESET : 0 0 0 0FIRMWARE : MAIN 0.01-.3 / SUB 0.00-231. RESETTING THE USE TIME1.Press the MENU key to display the menu.2.Use the [ ] key or the [ ] key to move the cursor to "8.POWER FAILURE/USED TIME" and then press the CUE([ ]) key to display the "POWER FAILURE/USED TIME"screen.3.Press the [ ] key until the cursor is displayed.4.Use the [ ] key or the [ ] key to move the cursor to theitem to be reset.5.Press the MENU RESET key.6.Press the CUE ([ ]) key until the value for the selecteditem is reset.7.Press the EXIT/OSD key to finish.NOTE:1. Please carry out the screw stopof the attachment to HDD in theorder of the number stampedon the HDD holder.2. Please attach the 1st set of anHDD unit in the backside of aproduct.3. Harness should use the socketof an end.CP-1 PWBDM-1 PWBOP-1 PWBTB-1 PWBPW-1 PWBHDD2 13 41243HOLDER HDD