Sanyo EM-S1577W Instruction Manual

Contents

8) Delay StartExample: to start a cooking at 12:12.(1) Set the cooking program wanted;(2) Press " Clock/Pre-Set " to display the current clock. The hour figures flash:(3) Press "1", "2", '1", '2";(4) Press " Start/Speed Cook " to confirm the setting. The unit will turn back tothe clock state.(5) Cooks begin when the time arrives.Note: (1) If the setting is not within the range 0:00–23:59, the setting will be invalid;(2) In the process of setting, if "STOP" is pressed or there is no operation within 1minute, the unit will go back to the previous state automatically;(3) The clock must be set before the delay start cooking. If the pre-set cooking hasnot been programmed and only time to start cooking is set, the whole set will beregarded as an alarm clock setting and 5 "beep" will be sound when the pre-settime is reached.9) Inquiring Function(1) In one stage cooking state, press " Power Level ", the current microwave power will bedisplayed for 3 seconds. After three seconds, the oven will turn back to the former state;(2) In pre-set state, press " Clock/Pre-Set " to inquire the time for delay start cooking. Thepre-set time will be flashing in the LCD for 2-3 seconds, then the oven will turn back tothe clock display.10). Fan Pro-longed Protection FunctionIf the cooking time is equal to or above 5 minutes, when the cooking ends, the microwaveoperation will be stopped automatically, while the fan will be still working for 15 seconds.11). Lock-out Function for ChildrenLock: In waiting state, press " STOP " for 3 seconds, there will be a long "beep" denotingentering into the children-lock state and LCD will display " ".Lock quitting: In locked state, press " STOP " for 3 seconds, there will be a long "beep"denoting that the lock is released.12). Automatic Going Out FunctionWhen the door is kept open, the oven light will be on and will go out automatically withoutany operation for 10 minutes.13). Cooking End Reminding FunctionWhen cooking ends, there will be 5 "beep" which is reminding the completion of cooking.14). Display Specification(1) In waiting state, LCD will display clock and " : " will flash.(2) In function setting state, LCD will display the related setting.(3) In the operation and suspending state, LCD will display the residual cooking time.(4) In the operation or suspending state or when the door is open, the flashing "Micro"indicator will be lighted and the restarting indicator will be flashing.12

/ 15

Related manuals for Sanyo EM-S1577W