Sanyo EM-X491S Supplement Of Service Manual

LLFILE NO.SUPPLEMENTOF EM-X491SSERVICE MANUAL Microwave Oven EM-)(41 1 S (AustraIialNew Zealand)MODEL NO. PRODUCT CODEEM-X491 s 43745052I EM-X411S I 43745053 ISee the Setvice Manual of EM-X670S (SM-8601 77)Foreword except the items described in this Service Manual.Read thie manual carefully, especially precaution on microwave energy, and follow the procedure strictly.L Careless servicing and testing may expose yourself to the microwave energy leakage.PRECAUTIONSPRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID POSSIBLE EXPOSURE TOEXCESSIVE MICROWAVE ENERGY(a)(b)(c)(d)Do not operate or allow the oven to be operated with the door open.Make the following safety checks on all ovens to be serviced before activating the magnetron or other microwavesource, and make repairs as necessaty:(1) Interlock operation, (2) proper door closing, (3) seal and sealing surfaces (arcing, wear, and other damage),(4) damage to or loosening of hinges and latches, (5) evidence of dropping or abuse.Before turning on microwave power for any service test or inspection within the microwave generating compatiments,check the magnetron, wave guide or transmission line, and cavity for proper alignment, integrity, and connections.Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation and transmis-sion systems shall be repaired, replaced, or adjusted by procedures described in this manual before the oven isreleased to the owner.REFERENCE NO. SS -860277