Sanyo FXD-770GD Operating Instructions Manual

Also see for FXD-770GD: Service manual

Contents

Sanyo FXD-770GD Operating Instructions Manual Manual pdf 17 page image

16GBEFD2. INSTALLATION PROCEDURESMOUNTING STRAP USE BUSHING USEWhen mounting the unit into a DIN–standard cutout (182 × 53 mm) in the dashboard or console, attach theprovided Removable Trim Ring to the unit.1. Insert the mounting bracket into the DIN-standard cutout (182 × 53 mm) in the dashboard or console.2. Bend the mounting bracket stopper outward until the bracket fits snugly in the cutout.Mounting Strap Use3. Attaching the Mounting Strap to the underside of the dash board, using screw. Attach the back of theunit to the Mounting Strap using support stem bolt and hardware.Bushing Use3. As shown in the figure above, securely fasten the screw, which has been inserted into the bush, to therear of the unit.UNIT REMOVAL1. Insert the unlock levers into the slots on each side of the unit until they click into place.2. Pull the levers to remove the unit.Notes• Handle the unlock levers carefully to avoid injuring your fingers.• Keep the unlock levers in a safe place for future use.DASH BOARDOR CONSOLE MountingBracketRemovableTrim RingFIRE WALL Mounting Strap ScrewBushingFXD-770GD_Ebody(P01-18) 3/7/01, 5:57 PM16