Sanyo LCD-19E30A Owner's Manual

Also see for LCD-19E30A: Owner's manual

Sanyo LCD-19E30A Owner's Manual Manual pdf 21 page image

21TUNING THE TV FOR THE FIRST TIMEBefore switching on the TV, put your decoder and media recorderto Standby if they are connected and ensure the antenna isconnected. Tosetup the TV use the buttons on the remote controlas detailed on page.This screen will appear the first time that the TV is switched on andezch time the TV is reset.3UHVVŻŹEXWWRQVWRVHOHFWWKH³0HQXODQJXDJH´IXQFWLRQLanguage include the “English”, “Françals” and “˛̜ ".8VHźEXWWRQWRVHOHFW³3URYLQFH6WDWH´3UHVVŻŹEXWWRQVto select the state in which you live. State include the NSW/ACT(New South Wales/Australian Capital Territory). VIC(Victoria),OLD(Queensland), SA(South Australia), WA(Westem Australia),TAS(Tasmania) and NT(Northern Territory).Press to setup “Energy Saving Mode”.3UHVVŻŹEXWWRQVWRVHOHFWWKH³(QHUJ\6DYLQJ0RGH´Notes:To ensure your television is operating at optimal energyefficiency, select ECO mode during initial activation. ECO mode isrecommended for normal home use.Energy Saving Mode: The factory default settings of this televisionmeet ENERGY SAVING requirements. Changing Picture Settingsmay increase energy consumption, possibly beyond the limitsrequired for ENERGY SAVING qualification.To return to ECO mode settings, select Standard picture mode.Standard picture mode is used to achieve published averagepower values, and this mode is recommended for normal homeuse.Press to set “Energy Saving Mode” and to start ATV/DTV Scan.The Auto Scan screen will appear and the TV will automaticallystart to search for available stations. The progress bar willmove along the line.When DTV search is completed, the TV will automatically turn tothe lowest logical channel number.12345••••67Initial InstallationMenu LanguageCountry/RegionProvince/StateStar TV Scan CancelOK BACKEnglishAustraliaNSW/ACTTV Auto Scan10%VLATV Channels:0MENU OPERATION (TV/AV mode)