Sanyo LCD-19XR9DA Service Manual

Also see for LCD-19XR9DA: Instruction manual

Contents

Sanyo LCD-19XR9DA Service Manual Manual pdf 48 page image

Assembling the stand and removing the stand column(Option)Push downwardsStandStand groove Stand columnSafety Precautions:1.Please read these instructions thoroughly prior to attempting this installation.2.Be sure to handle this product very carefully when attempting assembly. If you are unsure of yourcapability, or the use of tools necessary to complete this activity, refer to a professional installer orservice personnel. The manufacturer is not responsible for any damages or injuries that occur due tomishandling or improper assembly/installation.3.When using a table or bench as an aid to assembly, be sure to put a soft cushion or covering to preventaccidental scratching or damage to the unit's finish.4.The speaker is not intended to support the weight of this display. Do not move or handle this productfrom the speaker; which can cause damage to the display not covered under the manufacturer'swarranty.Place the stand on the table, hold the display upright and aim the bottom stand column toward thestand groove, then carefully push the display downwards, fully insert the column into the stand untilthe lock snaps. Now the stand is assembled.Installing the StandAdjusting the viewing angle of the TVAdjust the angle forward up to 5°and backward up to 10°.Note: When adjusting the angle, use caution to avoid slipping or tipping the TV.5°Standforward10°StandbackwardIf the stand is provided, please read these instructions thoroughly before attempting this installation.

/ 51

Related manuals for Sanyo LCD-19XR9DA