Sanyo LCD-22XR7SN Service Manual

Contents

WallClasperPositionerTake out these parts from the box.Wall MountingComponent(including bracketand connector)Expansion BoltWood Screw1M4 ScrewFig. 12Fig. 2aScrew 4pcs expansion bolts to fixthe wall mounting bracket on thewall.If your wall is a wooden structure, pleasefix the wall mounting bracket on the wallwith 8 pcs wood screws.3Fig. 3Use the 4pcs M4 screws to fix the wallmounting connector to the rear of thedisplay unit.Wall Mounting BracketWall Mounting Connector4Fig. 4Fully insert the two insertions on the wall mounting connector into thelocating grooves on the wall mounting bracket from top to bottom end.5Fig. 5Use screwdriver to revolve the Clasper to the Positionerfollowing the direction of the arrow.Safety Precautions:1. Be sure to ask an authorized service personnel to carry out setup.2. Thoroughly read this instruction before setup and follow the steps below precisely.3.The wall to be mounted should be made from solid materials. Only use accessories supplied by the manufacturer.4.Very carefully handle the unit during setup. We are not liable for any damage or injury caused by mishandling or improper installation.5.Be sure to place the unit on a stable and soft platform which is strong enough to support the unit.6.Do not uplift the speaker when moving the display. The appearance of the unit may different from the actual ones.7.Design and specifications are subject to change without notice.8. Retain these instructions for future reference.WALL MOUNTING INSTRUCTIONSNote: All the wall mounting parts are optional and may be unavailable in your model.Below we will show you how to mount the Display on the wall using our company’s wall mounting components.WallWall Mounting BracketFig. 2bBe s2. T oroThe waasghl reato be mrizedtrucd shovice pbefoe mnneletup aom sarryr ollowmateupstepOnow pracces y.yys s ed by manuExpan n olttCCntill M

/ 36

Related manuals for Sanyo LCD-22XR7SN