Sanyo LCD-24K50 Instruction Manual

9This LCD TV uses nominal input voltages of 110-240VAC. This LCD TV automatically selects the correctinput voltage. It is designed to work with single-phase power systems. To reduce risk of electricalshock, do not plug into any other type of powersystem. Consult your authorized dealer or servicestation if you are not sure of the type of power beingsupplied.Connect the LCD TV with all peripheral equipmentbefore turning the LCD TV on.CAUTIONFor safety, unplug AC power cord when the LCDTV is not in use.To t h e A C O u t l e t ( 11 0- 2 4 0 V A C ) . P u l l s t h eAC power cord out fromt h e L C D T V. T h e A Coutlet must be near thisequipment and must beeasily accessible.AC POWER CORDCONNECTING LCD TVIBM-compatiblecomputersor Macintoshcomputers(VGA / SVGA /XGA )DesktoptypeCables used for connection (These cables are notsupplied with this LCD TV.)● PC/VGA Cable (D-SUB 15pin)● HDMI Cable: HDMI Input● MAC Adapter (in the case of connecting Macintoshcomputer)● Audio Cable [Mini Plug (L/R)]NOTE:When connecting the cables, AC Power Cordsof both LCD TV and external equipment shouldbe disconnected from AC outlet. Turn LCDTV and peripheral equipment on before yourcomputer is switched on.PC InputAudio Output(stereo)Monitor OutputMACAdapterHDMI OutputAudio Input(stereo)HDMI InputLaptoptypeNote:1. You can connect the DVI source to HDMI input terminal by using the DVI to HDMI converter.2. When inputting 1080p signal to HDMI terminal, please use High Speed HDMI Cables to avoid picture/sound noise and no picture/sound.Digital AV EquipmentCONNECTING AC POWER CORDCONNECTING A COMPUTER