Sanyo LCD-26XR7 Service Manual

Also see for LCD-26XR7: Instruction manual

Contents

6Working principle analysis of the unitThe RF signal received by antenna will be sent to tuner TUN401, then IF signal will be obtainedthrough high amplifier and mixed frequency, through pre-intermediate amplified by V408, then it willbe sent to acoustic surface-wave Z407 to do IF filter and get better IF characteristics, then it will besent to N404 (TDA4470) to do intermediate amplification, phase-locked loop VCO and synchronouswave detection to get video signal TV-V; after pre-intermediate amplification IF will also be sent toacoustic surface-wave Z406 to do filter at the same time, then it will be sent to N404 to dointermediate amplification and output the second sound intermediate frequency signal (TV-SIF).The TV-V signal output from TDA4470 together with TV-SIF will be sent to main ICNS4(MST9E88L).Video signals of AV1/S, VGA, YPbPr and HDMI will be sent to MST9E88L, too.Video RGB of SCART1 and S-Y, S-C of SCART2 will still be sent to MST9E88L, and the audiosignal of them via audio switch N302(HEF4052BT) selection after also sent to MST9E88L.The main IC NS4(MST9E88L) is a high performance and fully integrated IC, which can realizeHDMI processing, video demodulating, video switch selection, A/D and D/A conversion,interlace/de-interlace processing, modes conversion, OSD and low-voltage differential output, ect.And it also has functions of audio selection, processing and MCU.The video signal via MST9E88L processing, output 4 pairs differential signal and 1 pair clocksignal for LCD panel display. TV-V output from TDA4470 via double video amplifying, it will be sentto SCART1 for AV-OUT. AV processed by MST9E88L via double video amplifying will be sent toSCART2 for AV-OUT, too.Audio signal via MST9E88L processing will be sent to sound amplifier N405 (MP7722DF)amplifying to speaker. The audio also sent to earphone amplifier N406(BH3547F) amplifying toearphone. TV audio signal will be sent to D/A converter NS6(DS4344) through I2S bus converting toanalog audio signal TV-L/R, then sent to SCART1 for AV-OUT. At the same time, TV-L/R togetherwith AV-L/R processed by MST9E88L will be sent to audio switch NS8(HEF4052BT), after selectingto SCART2 for AV-OUT.